View DF1B-2DES25DS_4578631.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
DF1B Series
sFeatures
1. New Insulation Displacement and Crimping Ideas
This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained. 1 By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case. 2 After connection, the contact can be replaced in excellent maintainability. 3 Because the insulation displacement area is protected by the case, high reliability can be assured. 4 Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required.
Cables with different current capacities can be mixed in one case
ID terminal (AWG24, 26, 28) Crimping contact (AWG20 to 30)
Figure 1 Potting status
2. Potting Header Available
The high profile header is also available, corresponding to the board potting process (sealed with resin) as waterproof measures.
3. Broad Variations
The single row and double row contacts are aligned for "Board to Cable" and "In-line" series, respectively, while standard tin and gold plating products are available. (Refer to the applicable combination pattern on next page.)
sApplications
Business equipment, particularly including the copy machine and printer
Figure 2
B183
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
BApplicable Combination
K Single Row Type Socket (Cable Side) DF1B-*S-2.5R Straight Through hole Type Pin header DF1B(Z)-*P-2.5DSA Right angle Through hole Type Pin header DF1B(Z)-*P-2.5DS Panel Mount Type In-line plug (Cable side) DF1BA-*EP-2.5RC
K Double Row Type Socket (Cable Side) DF1B-*DS-2.5RC Straight Through hole Type Pin header DF1B(Z)-*DP-2.5DSA Right angle Through hole Type Pin header DF1B(Z)-*DP-2.5DS Panel Mount Type In-line plug (Cable side) DF1BA-*DEP-2.5RC
In-line Connection Product (Cable to Cable Connection) : Full Lock Type K Single Row Type Socket (Cable Side) DF1B-*ES-2.5RC In-line plug (Cable side) DF1B-*EP-2.5RC
K Double Row Type Socket (Cable Side) DF1B-*DES-2.5RC In-line plug (Cable side) DF1B-*DEP-2.5RC
B184
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
sProduct Specifications
AWG 20 to 24 : 3A Rating Current rating (Note1) Voltage rating AWG 26 Cable Size AWG 28 AWG 30 250V AC : 2A : 1A : 0.5A Storage Temperature Range Storage Moisture Range -10 to +60c (Note3) -40 to 70% (Note3) Operating Temperature Range Operating Moisture Range -35 to +85c (Note2) -40 to 80%
UL-CSA Safety Standard Standardized Value Current rating Rating (Note1) Voltage rating Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Insertor/Extraction Force 5. Vibration 1000M ohms Min No flashover or insulation breakdown. 30m ohms Max MIN0.44N (45gf), MAX4.4N(450gf) No electrical discontinuity of 1s or more AWG 20 to 22: 3A Cable Size AWG 24 to 28: 1A AWG 30 30V AC Specification 500V DC : 0.5A
sUL CSA Safety File No. UL : E52653 CSA : LR95109
Condition 650V AC/1 minute 100mA Measure at the square steel pin of 0.6350.002mm Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. (-55c: 30 minutes 5 to 35c: 10 minutes (-85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles Tin plating : 30 cycles Gold plating : 50 cycles Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 402c and humidity of 90% to 95% 7. Temperature Cycle 8. Operating Life 9. Resistance to Soldering heat Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min. Contact resistance: 30m ohms max. No deformation of components affecting performance.
Note 1: Current rating of header is 3A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown.
sMaterial
Product Socket ID Contact for Socket Crimping Contact for Socket Pin Header In-line Plug ID Contact for In-line Plug Crimping Contact for In-line Plug Part Insulator Contact Contact Insulator Contact Insulator Contact Contact Material Polyamide Phosphor copper Phosphor copper Polyamide Brass Polyamide Phosphor copper Phosphor copper White Tin plated or gold plated Tin plated or gold plated White Tin plated or gold plated White Tin plated or gold plated Tin plated or gold plated Finish Remarks UL94V-0 ------ ------ UL94V-0 ------ UL94V-0 ------ ------
B185
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
sOrdering Information
KConnector
DF1B
q : DF 1B S DS P DP ES DES EP DEP
- * S 2.5 RC
w e r t r Contact Pitch: 2.5mm t Contact Type RC DS : ID/crimping socket (Note) : Right angle through hole DSA : Straight through hole Note: The single row socket DF1B-*S-2.5R only adds "R" to the tail, which has the same meaning as "RC".
q Series Name
e Connector Type : Single row socket : Double row socket : Single row pin header : Double row pin header : Single row in-line socket : Double row in-line socket : Single row in-line plug : Double row in-line plug
w Number of Contacts Single Row : 2 to 16, 18, 20 Double Row : 4 to 30, 34, 40
KSocket ID Contact
DF1B - R 24 F A
q q 1. Connection Type R : ID w Applicable Cable Size 24 : AWG24 26 : AWG26 28 : AWG28 w e r e Packaging Type Blank : Bag F : Reel r Plating Type Blank : Tin plated A : Gold plated
KPlug ID Contact
DF1B - 24 P R F
q q Applicable Cable Size 24 : AWG24 26 : AWG26 28 : AWG28 w Connector Type P : Plug w e r e Connection Type R : ID r Packaging Type Blank : Bag F : Reel
KCrimping Contact
DF1B - 2428 SCF A
q q Applicable Cable Size 2022 : AWG20 to 22 2428 : AWG24 to 28 28 : AWG30 w Packaging Type SCF : Socket Contact/Reel SC PC : Socket Contact/Bag : Plug Contact/Bag PCF : Plug Contact/Reel w e Plating Type Blank : Tin plating A B : Gold plated : Gold plated (Note) "A" is attached to the tail of the product name. In case of the plug contact, "B" is attached thereto. e
Note: In case of the socket contact,
B186
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
sSingle Row Socket
Photo: Contact Inserted
Unit: mm Part Number DF1B- 2S-2.5R DF1B- 3S-2.5R DF1B- 4S-2.5R DF1B- 5S-2.5R DF1B- 6S-2.5R DF1B- 7S-2.5R DF1B- 8S-2.5R DF1B- 9S-2.5R DF1B-10S-2.5R CL No. 541-0200-6 541-0201-9 541-0202-1 541-0203-4 541-0204-7 541-0205-0 541-0206-2 541-0207-5 541-0208-8 Number of Contacts 2 3 4 5 6 7 8 9 10 A 5 7.5 10 12.5 15 17.5 20 22.5 25 B 2.5 5 7.5 10 12.5 15 17.5 20 22.5 Yes RoHS Part Number DF1B-11S-2.5R DF1B-12S-2.5R DF1B-13S-2.5R DF1B-14S-2.5R DF1B-15S-2.5R DF1B-16S-2.5R DF1B-18S-2.5R DF1B-20S-2.5R CL No. 541-0209-0 541-0210-0 541-0211-2 541-0212-5 541-0213-8 541-0214-0 541-0215-3 541-0216-6 Number of Contacts 11 12 13 14 15 16 18 20 A 27.5 30 32.5 35 37.5 40 45 50 B 25 27.5 30 32.5 35 37.5 42.5 47.5 Yes RoHS
Note1: The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from the above figure. The 3 to 7 contacts connectors have the area at both ends.
sDouble Row Socket
Photo: Contact Inserted.
Unit: mm Part Number DF1B- 4DS-2.5RC DF1B- 6DS-2.5RC DF1B- 8DS-2.5RC DF1B-10DS-2.5RC DF1B-12DS-2.5RC DF1B-14DS-2.5RC DF1B-16DS-2.5RC DF1B-18DS-2.5RC DF1B-20DS-2.5RC CL No. 541-0648-0 541-0649-3 541-0650-2 541-0600-4 541-0601-7 541-0602-0 541-0603-2 541-0604-5 541-0605-8 Number of Contacts 4 6 8 10 12 14 16 18 20 A 7.5 10 12.5 15 20 25 B 2.5 5 7.5 10 Yes 15 20 RoHS Part Number DF1B-22DS-2.5RC DF1B-24DS-2.5RC DF1B-26DS-2.5RC DF1B-28DS-2.5RC DF1B-30DS-2.5RC DF1B-34DS-2.5RC DF1B-36DS-2.5RC DF1B-40DS-2.5RC CL No. 541-0606-0 541-0607-3 541-0608-6 541-0609-9 541-0610-8 541-0612-3 541-0613-6 541-0615-1 Number of Contacts 22 24 26 28 30 34 36 40 A 30 32.5 35 37.5 40 45 47.5 52.5 B 25 27.5 30 32.5 35 40 42.5 47.5 Yes RoHS
17.5 12.5 22.5 17.5 27.5 22.5
Note1: The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag. Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from the above figure.
B187
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
s Single Row Straight Pin Header
+0.1 KBoard Through-hole Diameter:O1.1+0
Unit: mm Tin plated Part Number DF1BZ- 2P-2.5DSA DF1BZ- 3P-2.5DSA DF1BZ- 4P-2.5DSA DF1BZ- 5P-2.5DSA DF1BZ- 6P-2.5DSA DF1BZ- 7P-2.5DSA DF1BZ- 8P-2.5DSA DF1BZ- 9P-2.5DSA DF1BZ-10P-2.5DSA DF1BZ-11P-2.5DSA DF1BZ-12P-2.5DSA DF1BZ-13P-2.5DSA DF1BZ-14P-2.5DSA DF1BZ-15P-2.5DSA DF1BZ-16P-2.5DSA DF1BZ-18P-2.5DSA CL No. 541-2000-8 541-2001-0 541-2002-3 541-2003-6 541-2004-9 541-2005-1 541-2006-4 541-2007-7 541-2008-0 541-2009-2 541-2010-1 541-2011-4 541-2012-7 541-2013-0 541-2014-2 541-2015-5 Gold plated Part Number DF1B- 2P-2.5DSA(01) DF1B- 3P-2.5DSA(01) DF1B- 4P-2.5DSA(01) DF1B- 5P-2.5DSA(01) DF1B- 6P-2.5DSA(01) DF1B- 7P-2.5DSA(01) DF1B- 8P-2.5DSA(01) DF1B- 9P-2.5DSA(01) DF1B-10P-2.5DSA(01) ------ DF1B-12P-2.5DSA(01) ------ DF1B-14P-2.5DSA(01) DF1B-15P-2.5DSA(01) DF1B-16P-2.5DSA(01) DF1B-18P-2.5DSA(01) CL No. 541-0225-7-01 541-0226-0-01 541-0227-2-01 541-0228-5-01 541-0229-8-01 541-0230-7-01 541-0231-0-01 541-0232-2-01 541-0233-5-01 ------ 541-0235-0-01 ------ 541-0237-6-01 541-0238-9-01 541-0239-1-01 541-0240-0-01 Number of Contacts 2 3 4 5 6 7 8 9 10 ------ 12 ------ 14 15 16 18 A 2.5 B 7.5 RoHS
5.0 10.0 7.5 12.5 10.0 15.0 12.5 17.5 15.0 20.0 17.5 22.5 20.0 25.0 22.5 27.5 YES -- -- -- -- 27.5 32.5 32.5 37.5 35.0 40.0 37.5 42.5 42.5 47.5
20 541-0241-3-01 541-2016-8 47.5 52.5 DF1BZ-20P-2.5DSA DF1B-20P-2.5DSA(01) Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag. Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.In addition, the 4 to 7 contact connectors have two concave portions at both ends.
B188
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
s Single Row Right Angle Pin Header
+0.1 K Board Through-hole Diameter:O1.1+0
Unit: mm Tin plated Part Number
DF1BZ- 2P-2.5DS DF1BZ- 3P-2.5DS DF1BZ- 4P-2.5DS DF1BZ- 5P-2.5DS DF1BZ- 6P-2.5DS DF1BZ- 7P-2.5DS DF1BZ- 8P-2.5DS DF1BZ- 9P-2.5DS DF1BZ-10P-2.5DS DF1BZ-11P-2.5DS DF1BZ-12P-2.5DS DF1BZ-13P-2.5DS DF1BZ-14P-2.5DS DF1BZ-15P-2.5DS DF1BZ-16P-2.5DS DF1BZ-18P-2.5DS DF1BZ-20P-2.5DS
Gold plated CL No.
CL541-2034-0 CL541-2035-2 CL541-2036-5 CL541-2037-8 CL541-2038-0 CL541-2039-3 CL541-2040-2 CL541-2041-5 CL541-2042-8 CL541-2043-0 CL541-2044-3 CL541-2045-6 CL541-2046-9 CL541-2047-1 CL541-2048-4 CL541-2049-7 CL541-2050-6
Part Number
DF1B- 2P-2.5DS(01) DF1B- 3P-2.5DS(01) DF1B- 4P-2.5DS(01) DF1B- 5P-2.5DS(01) DF1B- 6P-2.5DS(01) DF1B- 7P-2.5DS(01) DF1B- 8P-2.5DS(01) DF1B- 9P-2.5DS(01) DF1B-10P-2.5DS(01)
CL No. 541-0225-7-01 541-0226-0-01 541-0227-2-01 541-0228-5-01 541-0229-8-01 541-0230-7-01 541-0231-0-01 541-0232-2-01 541-0233-5-01 ------ 541-0235-0-01 ------ 541-0237-6-01 541-0238-9-01 541-0239-1-01 541-0240-0-01
Number of Contacts
2 3 4 5 6 7 8 9 10
A
2.5
B 7.5
RoHS
5.0 10.0 7.5 12.5 10.0 15.0 12.5 17.5 15.0 20.0 17.5 22.5 20.0 25.0 22.5 27.5 YES
------
DF1B-12P-2.5DS(01)
------
12
-- --
-- --
27.5 32.5
------
DF1B-14P-2.5DS(01) DF1B-15P-2.5DS(01) DF1B-16P-2.5DS(01) DF1B-18P-2.5DS(01) DF1B-20P-2.5DS(01)
------
14 15 16 18
32.5 37.5 35.0 40.0 37.5 42.5 42.5 47.5
20 47.5 52.5 541-0241-3-01 Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.
B189
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
s Single Row Straight Pin Header for Potting
B Tube Size
Unit: mm Part Number CL No. Number of Contacts 2 3 4 5 6 7 8 9 10 A 2.5 5 7.5 10 12.5 15 17.5 20 22.5 B 7.5 10 12.5 15 17.5 20 22.5 25 27.5 Tube Package Quantity RoHS 64pieces 48 38 32 27 24 21 19 17 Yes [Specific No.] -* *, (* *) (05): Tin plated (25) : Tin plated, tube packaging DF1BD- 2P-2.5DSA(**) 541-0800-3-** DF1BD- 3P-2.5DSA(**) 541-0801-6-** DF1BD- 4P-2.5DSA(**) 541-0802-9-** DF1BD- 5P-2.5DSA(**) 541-0803-1-** DF1BD- 6P-2.5DSA(**) 541-0804-4-** DF1BD- 7P-2.5DSA(**) 541-0805-7-** DF1BD- 8P-2.5DSA(**) 541-0806-0-** DF1BD- 9P-2.5DSA(**) 541-0807-2-** DF1BD-10P-2.5DSA(**) 541-0808-5-**
+0.1 K Board Positioning Boss Hole Diameter:O1.1+0 +0.1 K Board Through-hole Diameter:O1.1+0
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack. Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces). Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.In addition, the 4 to 7 contacts connectors have two concave portions at both ends.
BApplicable Potting Thickness : 6mm
Potting status
B190
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
s Double Row Straight Pin Header
+0.1 qBoard Through-hole Diameter:O1.1+0
Unit: mm Tin plated Part Number DF1BZ- 4DP-2.5DSA DF1BZ- 6DP-2.5DSA DF1BZ- 8DP-2.5DSA DF1BZ-10DP-2.5DSA DF1BZ-12DP-2.5DSA DF1BZ-14DP-2.5DSA DF1BZ-16DP-2.5DSA DF1BZ-18DP-2.5DSA DF1BZ-20DP-2.5DSA DF1BZ-22DP-2.5DSA DF1BZ-24DP-2.5DSA DF1BZ-26DP-2.5DSA DF1BZ-28DP-2.5DSA DF1BZ-30DP-2.5DSA DF1BZ-34DP-2.5DSA DF1BZ-36DP-2.5DSA CL No. 541-2017-0 541-2018-3 541-2019-6 541-2020-5 541-2021-8 541-2022-0 541-2023-3 541-2024-6 541-2025-9 541-2026-1 541-2027-4 541-2028-7 541-2029-0 541-2030-9 541-2031-1 541-2032-4 Gold plated Part Number DF1B- 4DP-2.5DSA(01) DF1B- 6DP-2.5DSA(01) DF1B- 8DP-2.5DSA(01) DF1B-10DP-2.5DSA(01) DF1B-12DP-2.5DSA(01) DF1B-14DP-2.5DSA(01) DF1B-16DP-2.5DSA(01) DF1B-18DP-2.5DSA(01) DF1B-20DP-2.5DSA(01) DF1B-22DP-2.5DSA(01) DF1B-24DP-2.5DSA(01) DF1B-26DP-2.5DSA(01) DF1B-28DP-2.5DSA(01) DF1B-30DP-2.5DSA(01) DF1B-34DP-2.5DSA(01) DF1B-36DP-2.5DSA(01) CL No. 541-0651-5-01 541-0652-8-01 541-0653-0-01 541-0616-4-01 541-0617-7-01 541-0618-0-01 541-0619-2-01 541-0620-1-01 541-0621-4-01 541-0622-7-01 541-0623-0-01 541-0624-2-01 541-0625-5-01 541-0626-8-01 541-0628-3-01 541-0629-6-01 Number of Contacts 4 6 8 10 12 14 16 18 20 22 24 26 28 30 34 36 A 2.5 B 7.5 RoHS
5.0 10.0 7.5 12.5 10.0 15.0 12.5 17.5 15.0 20.0 17.5 22.5 20.0 25.0 22.5 27.5 YES 25.0 30.0 27.5 32.5 30.0 35.0 32.5 37.5 35.0 40.0 40.0 45.0 42.5 47.5
47.5 52.5 541-2033-7 541-0631-8-01 DF1BZ-40DP-2.5DSA DF1B-40DP-2.5DSA(01) 40 Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.
B191
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
sDouble Row Right Angle Pin Header
+0.1 K Board Through-hole Diameter:O1.1+0
Unit: mm Tin plated Part Number DF1BZ- 4DP-2.5DS DF1BZ- 6DP-2.5DS DF1BZ- 8DP-2.5DS DF1BZ-10DP-2.5DS DF1BZ-12DP-2.5DS DF1BZ-14DP-2.5DS DF1BZ-16DP-2.5DS DF1BZ-18DP-2.5DS DF1BZ-20DP-2.5DS DF1BZ-22DP-2.5DS DF1BZ-24DP-2.5DS DF1BZ-26DP-2.5DS DF1BZ-28DP-2.5DS DF1BZ-30DP-2.5DS DF1BZ-34DP-2.5DS DF1BZ-36DP-2.5DS CL No. 541-2051-9 541-2052-1 541-2053-4 541-2054-7 541-2055-0 541-2056-2 541-2057-5 541-2058-8 541-2059-0 541-2060-0 541-2061-2 541-2062-5 541-2063-8 541-2064-0 541-2065-3 541-2066-6 Gold plated Part Number DF1B- 4DP-2.5DS(01) DF1B- 6DP-2.5DS(01) DF1B- 8DP-2.5DS(01) DF1B-10DP-2.5DS(01) DF1B-12DP-2.5DS(01) DF1B-14DP-2.5DS(01) DF1B-16DP-2.5DS(01) DF1B-18DP-2.5DS(01) DF1B-20DP-2.5DS(01) DF1B-22DP-2.5DS(01) DF1B-24DP-2.5DS(01) DF1B-26DP-2.5DS(01) DF1B-28DP-2.5DS(01) DF1B-30DP-2.5DS(01) DF1B-34DP-2.5DS(01) DF1B-36DP-2.5DS(01) CL No. 541-0654-3-01 541-0655-6-01 541-0656-9-01 541-0632-0-01 541-0633-3-01 541-0634-6-01 541-0635-9-01 541-0636-1-01 541-0637-4-01 541-0638-7-01 541-0639-0-01 541-0640-9-01 541-0641-1-01 541-0642-4-01 541-0644-0-01 541-0645-2-01 Number of Contacts 4 6 8 10 12 14 16 18 20 22 24 26 28 30 34 36 A 7.5 B 2.5 RoHS
10.0 5.0 12.5 7.5 15.0 10.0 17.5 12.5 20.0 15.0 22.5 17.5 25.0 20.0 27.5 22.5 YES 30.0 25.0 32.5 27.5 35.0 30.0 37.5 32.5 40.0 35.0 42.5 37.5 47.5 42.5
52.5 47.5 541-2067-9 541-0647-8-01 DF1BZ-40DP-2.5DS DF1B-40DP-2.5DS(01) 40 Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.
B192
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
s Single Row In-line Plug(Simple Lock Type)
KApplicable Socket: DF1B-*S-2.5R
Contact Inserted.
Unit: mm Part Number DF1BA- 2EP-2.5RC DF1BA- 3EP-2.5RC DF1BA- 4EP-2.5RC DF1BA- 5EP-2.5RC DF1BA- 6EP-2.5RC DF1BA- 7EP-2.5RC CL No. 541-0700-9 541-0701-1 541-0702-4 541-0703-7 541-0704-0 541-0705-2 Number of Contacts 2 3 4 5 6 7 A 2.5 5 7.5 10 12.5 15 B 7.1 9.6 12.1 14.6 17.1 19.6 Yes RoHS Part Number DF1BA- 8EP-2.5RC DF1BA- 9EP-2.5RC DF1BA-10EP-2.5RC DF1BA-12EP-2.5RC CL No. 541-0706-5 541-0707-8 541-0708-0 541-0710-2 Number of Contacts 8 9 10 12 A 17.5 20 22.5 27.5 B 22.1 24.6 27.1 32.1 Yes RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.In addition, the 3 to 7 contact connectors contain the concave portion at both sides.
B Panel Cutouts
Panel
Unit: mm C Applicable Plug DF1BA- 2EP-2.5RC DF1BA- 3EP-2.5RC DF1BA- 4EP-2.5RC DF1BA- 5EP-2.5RC DF1BA- 6EP-2.5RC DF1BA- 7EP-2.5RC DF1BA- 8EP-2.5RC DF1BA- 9EP-2.5RC DF1BA-10EP-2.5RC DF1BA-12EP-2.5RC Number of Contacts 2 3 4 5 6 7 8 9 10 12 Panel Board Thickness (Note 1) 0.5 to 1.2 11.2 13.7 16.2 18.7 21.2 23.7 26.2 28.7 31.2 36.2 1.3 to 1.6 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9 36.9 1.7 to 2.0 12.6 15.1 17.6 20.1 22.6 25.1 27.6 30.1 32.6 37.6 7.3 9.8 12.3 14.8 17.3 19.8 22.3 24.8 27.3 32.3 D
Note 3
Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded.
B193
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
s Double Row In-line Plug (Simple Lock Type)
KApplicable Socket: DF1B-*DS-2.5RC
Contact Inserted.
Unit: mm Part Number DF1BA- 4DEP-2.5RC DF1BA- 6DEP-2.5RC DF1BA- 8DEP-2.5RC DF1BA-10DEP-2.5RC DF1BA-12DEP-2.5RC DF1BA-14DEP-2.5RC DF1BA-16DEP-2.5RC DF1BA-18DEP-2.5RC CL No. 541-0719-7 541-0720-6 541-0721-9 541-0722-1 541-0723-4 541-0724-7 541-0725-0 541-0726-2 Number of Contacts 4 6 8 10 12 14 16 18 A 2.5 5 7.5 10 12.5 15 17.5 20 B 8.6 11.1 13.6 16.1 18.6 21.1 23.6 26.1 Yes RoHS Part Number DF1BA-20DEP-2.5RC DF1BA-22DEP-2.5RC DF1BA-24DEP-2.5RC DF1BA-26DEP-2.5RC DF1BA-28DEP-2.5RC DF1BA-30DEP-2.5RC DF1BA-34DEP-2.5RC CL No. 541-0727-5 541-0728-8 541-0729-0 541-0730-0 541-0731-2 541-0732-5 541-0734-0 Number of Contacts 20 22 24 26 28 30 34 A 22.5 25 27.5 30 32.5 35 40 B 28.6 31.1 33.6 36.1 38.6 41.1 46.1 Yes RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.
B Panel Cutouts
Unit: mm Number of Contacts 4 6 8 10 12 14 16 18 20 22 24 26 28 30 34 C Panel Board Thickness (Note 1) 0.5 to 1.2 1.3 to 1.6 1.7 to 2.0 DF1BA- 4DEP-2.5RC DF1BA- 6DEP-2.5RC DF1BA- 8DEP-2.5RC DF1BA-10DEP-2.5RC DF1BA-12DEP-2.5RC DF1BA-14DEP-2.5RC DF1BA-16DEP-2.5RC DF1BA-18DEP-2.5RC DF1BA-20DEP-2.5RC
Note 3
Applicable Plug
D 8.8 11.3 13.8 16.3 18.8 21.3 23.8 26.3 28.8 31.3 33.8 36.3 38.8 41.3 46.3
12.7 15.2 17.7 20.2 22.7 25.2 27.7 30.2 32.7 35.2 37.7 40.2 42.7 45.2 50.2
13.4 15.9 18.4 20.9 23.4 25.9 28.4 30.9 33.4 35.9 38.4 40.9 43.4 45.9 50.9
14.1 16.6 19.1 21.6 24.1 26.6 29.1 31.6 34.1 36.6 39.1 41.6 44.1 46.6 51.6
DF1BA-22DEP-2.5RC DF1BA-24DEP-2.5RC DF1BA-26DEP-2.5RC DF1BA-28DEP-2.5RC DF1BA-30DEP-2.5RC DF1BA-34DEP-2.5RC
Panel
Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded.
B194
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
s Single Row In-line Socket (Full Lock Type)
KApplicable Socket: DF1B-*DEP-2.5RC
Contact Inserted.
Unit: mm Part Number DF1B- 2ES-2.5RC DF1B- 3ES-2.5RC DF1B- 4ES-2.5RC DF1B- 5ES-2.5RC DF1B- 6ES-2.5RC DF1B- 7ES-2.5RC CL No. 541-0320-8 541-0321-0 541-0322-3 541-0323-6 541-0324-9 541-0325-1 Number of Contacts 2 3 4 5 6 7 A 2.5 5 7.5 10 12.5 15 B 6.5 9 11.5 14 16.5 19 Yes RoHS Part Number DF1B- 8ES-2.5RC DF1B- 9ES-2.5RC DF1B-10ES-2.5RC DF1B-11ES-2.5RC DF1B-12ES-2.5RC DF1B-13ES-2.5RC CL No. 541-0326-4 541-0327-7 541-0328-0 541-0329-2 541-0330-1 541-0331-4 Number of Contacts 8 9 10 11 12 13 A 17.5 20 22.5 25 27.5 30 B 21.5 24 26.5 29 31.5 34 Yes RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B Panel Cutouts
Note 3
Panel
Unit: mm E Applicable Plug DF1B- 2ES-2.5RC DF1B- 3ES-2.5RC DF1B- 4ES-2.5RC DF1B- 5ES-2.5RC DF1B- 6ES-2.5RC DF1B- 7ES-2.5RC DF1B- 8ES-2.5RC DF1B- 9ES-2.5RC DF1B-10ES-2.5RC DF1B-11ES-2.5RC DF1B-12ES-2.5RC DF1B-13ES-2.5RC Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 C 4.7 7.2 9.7 12.2 14.7 17.2 19.7 22.2 24.7 27.2 29.7 32.2 D 6.7 9.2 11.7 14.2 16.7 19.2 21.7 24.2 26.7 29.2 31.7 34.2 Panel Board Thickness (Note 1) 0.5 to 1.2 10.8 13.3 15.8 18.3 20.8 23.3 25.8 28.3 30.8 33.3 35.8 38.3 1.3 to 1.6 11.3 13.8 16.3 18.8 21.3 23.8 26.3 28.8 31.3 33.8 36.3 38.8 1.7 to 2.0 12 14.5 17 19.5 22 24.5 27 29.5 32 34.5 37 39.5
Note 1.The installation hole size C will be changed according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded.
B195
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
s Double Row In-line Socket (Full Lock Type)
KApplicable Socket: DF1B-*EP-2.5RC
Contact Inserted.
Unit: mm Part Number DF1B-10DES-2.5RC DF1B-12DES-2.5RC DF1B-14DES-2.5RC DF1B-16DES-2.5RC DF1B-18DES-2.5RC DF1B-20DES-2.5RC DF1B-22DES-2.5RC CL No. 541-0351-1 541-0352-4 541-0353-7 541-0354-0 541-0346-1 541-0355-2 541-0356-5 Number of Contacts 10 12 14 16 18 20 22 A 10 12.5 15 17.5 20 22.5 25 B 15 17.5 20 22.5 25 27.5 30 Yes RoHS Part Number DF1B-24DES-2.5RC DF1B-26DES-2.5RC DF1B-28DES-2.5RC DF1B-30DES-2.5RC DF1B-32DES-2.5RC DF1B-34DES-2.5RC CL No. 541-0357-8 541-0358-0 541-0359-3 541-0360-2 541-0361-5 541-0362-8 Number of Contacts 24 26 28 30 32 34 A 27.5 30 32.5 35 37.5 40 B 32.5 35 37.5 40 42.5 45 Yes RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B Panel Cutouts
Note 3
Panel
Unit: mm C Applicable Plug DF1B-10DES-2.5RC DF1B-12DES-2.5RC DF1B-14DES-2.5RC DF1B-16DES-2.5RC DF1B-18DES-2.5RC DF1B-20DES-2.5RC DF1B-22DES-2.5RC DF1B-24DES-2.5RC DF1B-26DES-2.5RC DF1B-28DES-2.5RC DF1B-30DES-2.5RC DF1B-32DES-2.5RC DF1B-34DES-2.5RC Number of Contacts 10 12 14 16 18 20 22 24 26 28 30 32 34 Panel Board Thickness (Note 1) 0.5 to 1.2 19.1 21.6 24.1 26.6 29.1 31.6 34.1 36.6 39.1 41.6 44.1 46.6 49.1 1.3 to 1.6 19.8 22.3 24.8 27.3 29.8 32.3 34.8 37.3 39.8 42.3 44.8 47.3 49.8 1.7 to 2.0 20.5 23 25.5 28 30.5 33 35.5 38 40.5 43 45.5 48 50.5 15.2 17.7 20.2 22.7 25.2 27.7 30.2 32.7 35.2 37.7 40.2 42.7 45.2 3.7 3.7 3.7 3.7 3.7 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 D E
Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded.
B196
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
s Single Row In-line Plug (Full Lock Type)
KApplicable Socket: DF1B-*ES-2.5RC
Contact Inserted.
Unit: mm Part Number DF1B- 2EP-2.5RC DF1B- 3EP-2.5RC DF1B- 4EP-2.5RC DF1B- 5EP-2.5RC DF1B- 6EP-2.5RC DF1B- 7EP-2.5RC CL No. 541-0332-7 541-0333-0 541-0334-2 541-0335-5 541-0336-8 541-0337-0 Number of Contacts 2 3 4 5 6 7 A 8.9 11.4 13.9 16.4 18.9 21.4 B 2.5 5 7.5 10 12.5 15 Yes RoHS Part Number DF1B- 8EP-2.5RC DF1B- 9EP-2.5RC DF1B-10EP-2.5RC DF1B-11EP-2.5RC DF1B-12EP-2.5RC DF1B-13EP-2.5RC CL No. 541-0338-3 541-0339-6 541-0340-5 541-0341-8 541-0342-0 541-0343-3 Number of Contacts 8 9 10 11 12 13 A 23.9 26.4 28.9 31.4 33.9 36.4 B 17.5 20 22.5 25 27.5 30 Yes RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
s Double Row In-line Plug (Full Lock Type)
KApplicable Socket: DF1B-*DES-2.5RC
Contact Inserted.
Unit: mm Part Number DF1B-10DEP-2.5RC DF1B-12DEP-2.5RC DF1B-14DEP-2.5RC DF1B-16DEP-2.5RC DF1B-18DEP-2.5RC DF1B-20DEP-2.5RC DF1B-22DEP-2.5RC CL No. 541-0366-9 541-0367-1 541-0368-4 541-0369-7 541-0350-9 541-0370-6 541-0371-9 Number of Contacts 10 12 14 16 18 20 22 A 17.2 19.7 22.2 24.7 27.2 29.7 32.2 B 10 12.5 15 17.5 20 22.5 25 Yes RoHS Part Number DF1B-24DEP-2.5RC DF1B-26DEP-2.5RC DF1B-28DEP-2.5RC DF1B-30DEP-2.5RC DF1B-32DEP-2.5RC DF1B-34DEP-2.5RC CL No. 541-0372-1 541-0373-4 541-0374-7 541-0375-0 541-0376-2 541-0377-5 Number of Contacts 24 26 28 30 32 34 A 34.7 37.2 39.7 42.2 44.7 47.2 B 27.5 30 32.5 35 37.5 40 Yes RoHS
Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B197
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
s ID Contact for Socket
Part Number DF1B-R24F DF1B-R24 DF1B-R26F DF1B-R26 DF1B-R28F DF1B-R28
CL No. 541-0217-9 541-0220-3 541-0218-1 541-0221-6 541-0219-4 541-0222-9
Applicable Cable Indication 24 26 28 24 26 28
Applicable Cable AWG AWG 24 AWG 26 AWG 28 AWG 24 AWG 26 AWG 28 UL Style 1061 1061 1007 1061 1007 1061 1061 1007 1061 1007 Wire Construction Jacket Diameter 11 cores./0.16mm 0.9 to 1.39mm 7 cores./0.16mm 0.9 to 1.39mm
Packaging Type Reel Bag Reel Bag Reel Bag Reel Bag Reel Bag Reel Bag
Quantity 10000 100 10000 100 10000 100 10000 100 10000 100 10000 100
Finish
RoHS
Tin plated
7 cores./0.127mm 0.9 to 1.39mm 11 cores./0.16mm 0.9 to 1.39mm 7 cores./0.16mm 0.9 to 1.39mm
DF1B-R24FA(06) 541-0261-0-06 DF1B-R24A(06) 541-0264-9-06 DF1B-R26FA(06) 541-0262-3-06 DF1B-R26A(06) 541-0265-1-06 DF1B-R28FA(06) 541-0263-6-06 DF1B-R28A(06) 541-0266-4-06
Yes
Gold plated
7 cores./0.127mm 0.9 to 1.39mm
K ID Contact Extraction Tool DF-C-PO (A) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department.
s Crimping Contact for Socket
K Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Wire construction) AWG20 (21cores/0.18mm) AWG22 (17cores/0.16mm) AWG24 (11cores/0.16mm) AWG26 (7cores/0.16mm) AWG28 (7cores0.127mm) AWG30 (7cores/0.1mm) Part Number CL No. Applicable Cable Indication 20 22 24 28 30 20 22 24 28 30 Applicable Cable AWG AWG 20 to AWG 22 AWG 24 to AWG 28 AWG 30 AWG 20 to AWG 22 AWG 24 to AWG 28 AWG 30 Jacket Diameter 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm Packaging Type Reel Bag Reel Bag Reel Bag Reel Bag Reel Bag Reel Bag Quantity 10000 100 10000 100 10000 100 10000 100 10000 100 10000 100 Gold plated Yes Tin plated K Recommended Cable UL1061, UL1007 K Strip Length 2.0 to 2.5mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department.
Finish
RoHS
DF1B-2022SCF 541-0223-1 DF1B-2022SC DF1B-2428SC DF1B-30SCF DF1B-30SC 541-0224-4 541-0679-4 541-0682-9 541-0683-1 DF1B-2428SCF 541-0678-1
DF1B-2022SCFA 541-0662-1 DF1B-2022SCA 541-0663-4 DF1B-2428SCFA 541-0680-3 DF1B-2428SCA 541-0681-6 DF1B-30SCFA DF1B-30SCA 541-0684-4 541-0685-7
K Crimping Contact Extraction Tool DF-C-PO (B)
B198
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
s ID Contact for Plug
Part Number
CL No.
Applicable Cable Indication 24 26 28 AWG AWG 24 AWG 26 AWG 28
Applicable Cable UL Style 1061 1061 1007 1061 1007 Wire structure Jacket Diameter 11 pcs./0.16mm 0.9 to 1.39mm 7 pcs./0.16mm 0.9 to 1.39mm
Packaging Type Reel Bag Reel Bag Reel Bag
Quantity 10000 100 10000 100 10000 100
Finish
RoHS
DF1B-24PRF 541-0666-2 DF1B-24PR DF1B-26PR DF1B-28PR 541-0667-5 541-0669-0 541-0671-2 DF1B-26PRF 541-0668-8 DF1B-28PRF 541-0670-0
Tin plated
Yes
7 pcs./0.127mm 0.9 to 1.39mm
K ID Contact Extraction Tool DF-C-PO (C) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, contact Hirose sales department.
s Crimping Contact for Plug
K Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Contact wire construction) AWG20 (21 pieces/0.18mm) AWG22 (17 pieces/0.16mm) AWG24 (11 pieces/0.16mm) AWG26 (7 pieces/0.16mm) AWG28 (7 pieces/0.127mm) AWG30 (7 pieces/0.1mm) Applicable cable indicator 20 22 24 28 30 20 22 24 28 30 Applicable Cable AWG AWG 20 to AWG 22 AWG 24 to AWG 28 AWG 30 AWG 20 to AWG 22 AWG 24 to AWG 28 AWG 30 Jacket Diameter 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm Packaging Type Reel Bag Reel Bag Reel Bag Reel Bag Reel Bag Reel Bag K Recommended Cable UL1061, UL1007 K Strip Length 3.0 to 3.7mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department.
Part Number
CL No.
Quantity 10000 100 10000 100 10000 100 10000 100 10000 100 10000 100
Treatment
RoHS
DF1B-2022PCF 541-0259-9 DF1B-2022PC 541-0260-8 DF1B-2428PCF 541-0664-7 DF1B-2428PC 541-0665-0 DF1B-30PCF DF1B-30PC 541-0686-0 541-0687-2
Tin plated
DF1B-2022PCFB 541-0690-7 DF1B-2022PCB 541-0691-0 DF1-PD2428SCFB 541-0660-6 DF1-PD2428SCB 541-0661-9 DF1B-30PCFB 541-0688-5 DF1B-30PCB 541-0689-8
Yes
Gold plated
K Crimping Contact Extraction Tool DF-C-PO (C)
B199
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection (Product Compliant withwww.hirose-connectors.com, or contact your Hirose sales representative. DF1B Seriesq2.5mm Pitch Connector for Discrete Wire products status on the Hirose website RoHS search at UL/CSA Standard)
B Applicable Tool
[Press Main Unit and Applicator]
[Manual Crimping Tool]
Connection Type
Type Applicator
Part Number AP105-DF1B-R AP105-DF1B-PR DF1B-T2428HR DF1B-T2428PHR AP105-DF1B-2022S AP105-DF1B-2428S AP105-DF1B-30S AP105-DF1B-2022P AP105-DF1B-2428P AP105-DF1B-30P DF1B-TA2022SHC DF1B-TA2428SHC
CL No. 901-4507-4 901-4536-2 550-0171-0 550-0221-7 901-4510-9 901-4518-0 901-4517-8 901-4509-0 901-4521-5 901-4519-3 550-0182-7 550-0209-1 550-0211-3 550-0183-0 550-0224-5 550-0210-0 901-0005-4 550-0170-8 550-0179-2 550-0198-7
Applicable Contacts DF1B-R**F/FA06 **=24,26,28 DF1B-**PRF**=24,26,28 DF1B-R**/A06**=24,26,28 DF1B-**PR/PRB **=24,26,28 DF1B-2022SCF/SCFA DF1B-2428SCF/SCFA DF1B-30SCF/SCFA DF1B-2022PCF/PCFB DF1B-2428PCF,DF1-PD2428SCF/SCFB DF1B-30PCF/PCFB DF1B-2022SC/SCA DF1B-2428SC/SCA DF1B-30SC/SCA DF1B-2022PC/PCB DF1B-2428PC,DF1-PD2428SCB DF1B-30PC/PCB __________________________________ DF1B-R**F DF1B-****SCF
ID Manual ID tool
Applicator
Crimping
Manual crimping tool
DF1B-TA30SHC DF1B-TA2022PHC DF1B-TA2428PHC DF1B-TA30PHC
Press Main Unit Extraction Tool
CM-105 DF-C-PO(A) DF-C-PO(B) DF-C-PO(C)
DF1B-****PC,DF1B-**PRF Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product
B200
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch Connector for Discrete Wire Connection (Product Compliant with your Hirose sales representative. DF1B Seriesq2.5mm check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact UL/CSA Standard)
B Applicable Tool
BPrecautions
1. Recommended Soldering Condition 2. Cleaning Condition 3. Connection Condition 4. Cautions Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds Refer to Nylon Connector Use Hand book. Refer to Nylon Connector Use Hand book. sThe color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance. 5. Precation Refer to Nylon Connector Use Hand book.
B201

▲Up To Search▲

Price & Availability of DF1B-2DES25DS

	To Download DF1B-2DES25DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .